Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the nimble heat control of gas cooktops, but requires an electric oven to bake? Find a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs with experience in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques, such as charring. These powerful stoves are costly particularly if they need an extra gas connection and an electrician for installation.
What is a 13amp plug?
If you have a dual-fuel range cooker (also called a gas and an electric oven) you'll need a 13 amp plug. The plug also needs to be wired in the cooker ring circuit by a fully competent electrician.
This assures that the current that flows through the plug is secure and not too high, which could result in an electrical fire risk. The plug has a fuse that controls the current. The fuse blows when the current is over its capacity, which protects the appliance from overload of electricity.
The fuse is rated at 13 amps as indicated on the top of the plug and this is the maximum amount of current that the plug can carry without causing harm to the appliance or overheating the socket. It is crucial that when replacing fuses, you always use the same rated amps as the original. You risk overheating a socket if you replace a fuse with a different rating.
A 13 amp fuse is likely to be a ceramic one, which is very durable and is able to withstand high temperatures produced by a range cooker. The ceramic element is also fire-proof, making it a more suitable choice than other kinds of fuse.
There are several ways to install a 13 amp plug. The plug can be connected to a live socket with either a screw or a jaw cord clamp. duel fuel range on the cord should be tightened after the plug has been firmly pushed into place.
Before connecting the wires, you may have to remove the wiring diagram on cardboard that is positioned on top of the pins on some plugs. The wires should be cut to the correct length, as if they are too long they may be crushed when plug covers are changed. The earth wire should be the longest in order to connect it before the neutral and line pins.
How do I fit the 13amp plug?
The vast majority of dual fuel range cookers sold in UK are wired with a 13 amp plug. This is vital because ovens draw a substantial current, while normal plug sockets have a 10-amp rating.
In general, new appliances should be equipped with plugs at the time of sale. This is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to the plug, and this is the reason why the problem occurs.
When connecting the cooker to an existing plug socket the first step is to ensure that the rating of the fuse inside the fuse box is in line with the plug's rating. This is vital as an incorrectly sized fuse could pose a risk.
It is also important to ensure that the fuse is seated in the cartridge and there isn't any movement within it. The next step is to prepare the flex to be used. First remove the sheathing from the flex in order to expose the three insulated conductors within. Next nick the sheathing at the point of entry to the plug (beyond the cord grip) using a knife, but without damaging the individual conductors that are insulated. This nick must be large enough to allow the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing, leaving about 40mm over the flex end.
The flex is then positioned over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. The sheathing on each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then secured to the terminal by with the help of the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each wire that is insulated to the appropriate terminal by using the channel in the plug. Begin with the earth conductor first, then the neutral and finally the live.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for the 13amp plug is 3kw at 230 volts. This is a large amount of power, however the standard fuse in the UK plug won't fail until the cable reaches a hazardous temperature. A defective plug or socket could cause fire, therefore it is important to keep an eye on how much power you use, especially in the kitchen.
The fuses in plugtops are ceramic, approximately 25mm in length and rated 240V mains. They will be marked with the BS kitemark or similar marking on the side and contain sand. There are also cheaper plastic or glass alternatives but they shouldn't be used with a live plug or else you could blow up the fuse and possibly be electrocuted!
In the UK the majority of dual fuel range cookers are hardwired. They cannot be plugged directly into a wall outlet. They are usually connected using a dedicated cooker circuit, that is only suitable for appliances with a maximum of 20 amps.
You can verify the ring circuit at your home by checking the fuse box, or by speaking to an electrician nearby. You can ask whether the sockets are connected to the same ring or if they're distinct. They should also be able tell you if there is a dedicated circuit to power your oven.
The size of your kitchen will be a major factor when you're looking to buy a dual-fuel range cooker. Luckily, we have a great range of cookers that will fit any space, from compact 50-60 cm dual fuel models and vast 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're looking for something different Don't worry, we also have a great range of gas and electric multifunction cookers. These versatile machines let you cook a variety of dishes including curries, pasta, and casseroles!
Explore our entire range of Cookers in Currys on our website or visit us in store for a look. We provide free home delivery and installation on selected range cookers and we also offer flexible payment options. If you have any questions our team is available to assist - just drop us an email or give us a call. Credit is subject to status, and terms and condition apply.
What is the maximum draw of the switch on a cooker?
There is a lot confusion about the maximum current draw of the cooker switch. The truth is that most cookers aren't made to connect to a standard socket, but rather are wired hard and fed into an oven ring circuit. It is because they often consume more than 20 amps when both the electric and gas hob oven are being used.
You will not find dual fuel range cookers that can be fitted in a standard socket because this could create an enormous fire risk and infringe electrical regulations. A professional electrician should always install new electrical circuits in the kitchen, connecting them to the cooker. They will also ensure that the load of the oven and the hob does not exceed the circuit's supply capacity.
The advantages of a dual fuel range cooker include the responsive heating of a gas cooktop with the precision of an electric oven. They are therefore popular with both home cooks and chefs. If you are looking to experiment with various cooking techniques like searing and charring, a dual fuel range cooker is the perfect option.
When buying a new cooktop, you must be aware of a number of aspects such as size, function, and price. You will also require a gas connection in your home to allow the appliance. If you're unsure you're not sure, it's recommended to get a Gas Safe engineer inspect your home prior to installing.
Currys dual fuel range cookers are available with a variety of models to meet all budgets. From affordable models by Indesit and Zanussi and our own Essentials collection. If you're seeking something more sophisticated we have a selection of premium JennAir models, that come with many innovative features.
If you are buying a brand new dual fuel range cooker, it is important to check the owner's manual for specific information regarding the electrical and gas requirements. You will require an electric connection to your home. A plumber may be required to connect it for you. It is also possible to require a cooker-ring circuit that is installed by a qualified electrical engineer.